E-flite Mini ShowTime 4D ARF - Manual (Page 31)

1 E-flite Mini ShowTime ARF Assembly Manual
 7. With the aircraft fully assembled, install the battery
into the battery compartment. Secure the battery using
the hook and loop tape and the hook and loop straps.
Note: Place a piece of hook and loop tape on the bottom
of the battery and on the fuselage where the battery
rests. This will keep the battery from shifting forward or
backward during extreme maneuvers.
Optional Side Force
Generator Installation
Required Parts
Assembled airframe
Side Force Generator ™ (2)
4-40 x 1 /
2
-inch machine screw (4)
Spacers
Required Tools and Adhesives
Hobby knife
Hex wrench:
3 /
32
-inch
Felt-tipped pen
  1. Slide two 4-40 x 1 / 2
-inch screws through the holes in
the Side Force Generator. Place a spacer onto each of
the screws as shown.