E-flite Mini ShowTime 4D ARF - Manual (Page 21)

1 E-flite Mini ShowTime ARF Assembly Manual
 2. Slide the wing panel with tube into position
on the fuselage.
  3. Secure the wing panel using a 4-40 x 1 / 2
-inch socket
head screw with #4 washer (silver) using a 3 /
32
-inch hex
wrench.
  4. Repeat Steps 2 and 3 for the remaining wing panel.
Stabilizer and Elevator
Required Parts
Fuselage w/wing installed
Stabilizer Elevator
CA hinge (4)
Required Tools and Adhesives
Hobby knife Felt-tipped pen
Ruler T-pins
Thin CA
 1. Position the stabilizer into the slot in the aft end
of the fuselage. Check that the stabilizer is centered
in the fuselage.