E-flite Mini ShowTime 4D ARF - Manual (Page 13)

1 E-flite Mini ShowTime ARF Assembly Manual
 5. Slide the spinner backplate onto the adapter. Thread
the propeller nut onto the adapter, but do not tighten it
at this time.
 6. Tape four pieces of card stock to the fuselage to
indicate the locations for the cowl attaching screws and
the front edge of the fuselage.
 7. Slide the cowling on the fuselage. With the propeller
adapter on the motor shaft, position the cowl so there is
a gap between the spinner and cowling.
 8. Use a 1 / 16
-inch (1.5mm) drill bit to drill holes through
the cowling and into the sides of the fuselage.