E-flite Mini ShowTime 4D ARF - Manual (Page 23)

E-flite Mini ShowTime ARF Assembly Manual
 6. Slide the elevator into position, then the stabilizer.
 7. Follow the same procedure for hinging the ailerons to
hinge the stabilizer/elevator. Use six hinges for this step.
Note: Start with the two hinges at the center nearest the
fuselage. Continue outward to the center hinges, then the
hinges at the tips. Be careful not to damage the joiner
section of the elevators.
 8 . Check the alignment and make sure everything lines
up. Wick Thin CA into the joint between the fuselage and
stabilizer. Make sure to glue both top and bottom. Do
not use accelerator— to allow the CA to wick in the joint,
providing the best bond possible.