E-flite Pitts Model 12 15e ARF - Manual (Page 27)

27 E-flite Pitts Model 12 15e ARF Assembly Manual
Motor Installation
Required Parts
Fuselage Cowling
2mm x 6mm sheet metal screw Hook and loop strap (2)
Required Tools and Adhesives
Motor w/X-mount & hardware Drill
Drill bit: 1/16-inch (1.5mm) Propeller
Phillips screwdriver: #0, #1 Hex wrench: 3/32-inch
6-minute epoxy Threadlock
 1. Attach the X-mount to the motor using the hardware
provided with the motor. Use threadlock on the screws to
prevent them from vibrating loose.
 2. Use 6-minute epoxy to glue the four 1/2 x 1/2 x 1/2-
inch (12 x 12 x 12mm) hardwood cowl mounting blocks
to the firewall.
 3. Attach the motor to the firewall using the hardware
provided with the motor. Use threadlock on the screws to
prevent them from vibrating loose.