E-flite Pitts Model 12 15e ARF - Manual (Page 14)

14 E-flite Pitts Model 12 15e ARF Assembly Manual
Stabilizer Installation
Required Parts
Fuselage w/wings Stabilizer/elevator
Required Tools and Adhesives
Thin CA Hobby knife
Ruler Felt-tipped pen
 1. Use a hobby knife to remove the covering for the
horizontal stabilizer from the fuselage.
 2. Slide the stabilizer in the slot. Center the stabilizer as
shown in the image below.
 3. Make sure the stabilizer is parallel to the wings as
shown. Lightly sand the slot in the fuselage as necessary
to correct for any misalignment.