E-flite Pitts Model 12 15e ARF - Manual (Page 20)

20 E-flite Pitts Model 12 15e ARF Assembly Manual
  6. Fit the wheel into the wheel pant as shown.
  7. Slide the screw through the bottom hole in the landing
gear. Use a 3mm nut and 3mm washer to attach the
wheel/wheel pant to the landing gear. Use threadlock on
the nut to prevent it from vibrating loose.
  8. With the fuselage resting on its wheels, check that the
wheel pants will clear the ground as shown.
  9. To keep the wheel pant from rotating, secure the wheel
pant using a 2mm x 6mm sheet metal screw.
 10. Repeat Steps 5 through 9 for the remaining wheel
and wheel pant.