E-flite Pitts Model 12 15e ARF - Manual (Page 24)

24 E-flite Pitts Model 12 15e ARF Assembly Manual
 9. Repeat Steps 1 through 8 for the elevator servo.
 10. Install the receiver in the fuselage. Follow the
manufacturers installation instructions for proper
placement of your receiver. Plug the two extensions for
the aileron servos into the receiver at this time as well.
 11. Remove the servo cover from the bottom of the
bottom wing. Use a hobby knife to remove the covering
in the cover for the servo arm.
 12. Position the aileron servo onto the cover. Align
the servo arm so it exits the opening without binding
on the cover during operation. Make the position of
the servo on the cover.