E-flite Pitts Model 12 15e ARF User Manual

Page 15

E-flite Pitts Model 12 15e ARF Assembly Manual



4. Align the stabilizer so it is in alignment with the

wings as shown.



5. Double-check the alignment of the stabilizer. Use a

felt-tipped pen to trace the outline of the fuselage onto

the stabilizer.



6. Use a hobby knife with a new blade to trim the

covering inside the line drawn in the previous step.

Note: Use care not to cut into the underlying wood of the

stabilizer. This could significantly reduce the strength of

the stabilizer and cause it to fail in flight.

Hint: Use either a hot knife or soldering iron to cut the

covering, as this will reduce the amount of pressure

needed to cut the covering, and in turn, reduce the

chances of cutting into the underlying wood.