E-flite Pitts Model 12 15e ARF - Manual (Page 12)

12 E-flite Pitts Model 12 15e ARF Assembly Manual
 4. Use a hobby knife to remove the covering from inside
the line drawn in the previous step. Use medium CA to
glue the support onto the bottom wing.
 5. Use the 3mm x 25mm machine screw to draw the
3mm blind nut in position under the wing support plate
in the fuselage.
 6. Slide the dowels into the fuselage and use the
3mm x 25mm machine screw and 3mm washer to
attach the bottom wing to the fuselage.
 7. Locate the two wing struts. Use the photo to determine
the top and bottom of the struts. Use a hobby knife to
expose the holes for mounting the struts.