E-flite Sobre 3D Profile - Manual (Page 8)

8 E-flite Sobré 3D Profile Assembly Manual
Airframe Assembly
Required Parts
Vertical fuselage
Horizontal fuselage
Wing w/ailerons
Stabilizer w/elevators
Motor mount
Required Tools and Adhesives
Foam-compatible CA, Medium
Foam-compatible accelerator (can be used to speed up cure time)
Square
 1. Locate the vertical and horizontal fuselage pieces.
Slide the horizontal fuselage into the vertical fuselage
starting at the opening for the wing/radio equipment.
Use care not to damage any of the alignment tabs on
the vertical fuselage.
 2. Locate the wing and slide it into the vertical
fuselage underneath the horizontal fuselage. Use
care not to damage either the vertical or horizontal
fuselage pieces.
Hint: Fold one of the ailerons up and onto the wing
to make it a little narrower to install into the fuselage.
Push the wing past center to move the aileron back into
position, then center the wing.