Banner LED Spot Lights - Manual (Page 2)

Dimensions
Installing the Spot Light
NOTE: Before installing this spot light, install an ambient light filter behind the sensor lens. The filter improves
image quality by reducing unwanted ambient light.
Sensing Shiny Surfaces: To eliminate direct reflections without using polarizing filters, angle the light approximately 15° (or
more) from perpendicular to a shiny surface.
Accessory Mounting Brackets
Spot light's standard 1/4 - 20 thread mounting hole is compatible with camera mounting bracket knuckle.
Model Description
SMBPPK3 3" Column, Base, and Knuckle Kit
SMBPPK6 6" Column, Base, and Knuckle Kit
SMBPPK Mounting Bracket Knuckle
SMBPPKB Mounting Bracket Base
Model Description
SMBPPKE3 Mounting Bracket Knuckle 3" Extension
SMBPPKE6 Mounting Bracket Knuckle 6" Extension
SMBPPLK 2" Mounting Knuckle Assembly
LED..SM Series Spot Lights
Warranty: Banner Engineering Corporation warrants its products to be free from defects
for a period of one year. Banner Engineering Corporation will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to
the factory during the warranty period. This warranty does not cover damage or liability
for the improper application of Banner products. This warranty is in lieu of any other
warranty either expressed or implied.