Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 4)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
EZA-MBK-21 –
EZ-SCREEN™ Mounting Bracket
P/N 121007
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Light Screen
Model
Sensor Housing
Length
L1
Sensor #1 Sensor #2
Mounting
Dimension L2
Mounting
Dimension L3
Mounting
Dimension L4
Mounting
Dimension L5
SLSC..-300 372 mm (14.6") 476.1 mm (18.6") 442.4 mm (17.4") 424.7 mm (16.7") 395.5 mm (15.6")
SLSC..-450 522 mm (20.6") 621.6 mm (24.5") 592.4 mm (23.3") 574.7 mm (22.6") 545.5 mm (21.5")
SLSC..-600 671 mm (26.4") 770.6 mm (30.3") 741.4 mm (29.2") 723.7 mm (28.5") 694.5 mm (27.3")
SLSC..-750 821 mm (32.3") 920.6 mm (36.2") 891.4 mm (35.1") 873.7 mm (34.4") 844.5 mm (33.2")
SLSC..-900 971 mm (38.2") 1070.6 mm (42.1") 1041.4 mm (41.0") 1023.7 mm (40.3") 994.5 mm (39.2")
SLSC..-1050 1120 mm (44.1") 1219.6 mm (48.0") 1190.4 mm (46.9") 1172.7 mm (46.2") 1143.5 mm (45.0")
SLSC..-1200 1270 mm (50.0") 1369.6 mm (53.9") 1340.4 mm (52.8") 1322.7 mm (52.1") 1293.5 mm (50.9")
SLSC..-1350 1420 mm (55.9") 1519.6 mm (59.8") 1490.4 mm (58.7") 1472.7 mm (58.0") 1443.5 mm (56.8")
SLSC..-1500 1569 mm (61.8") 1668.6 mm (65.7") 1639.4 mm (64.5") 1621.7 mm (63.8") 1592.5 mm (62.7")
SLSC..-1650 1719 mm (67.7") 1818.6 mm (71.6") 1789.4 mm (70.4") 1771.7 mm (69.8") 1742.5 mm (68.6")
SLSC..-1800 1869 mm (74.9") 1968.6 mm (77.5") 1939.4 mm (76.4") 1921.7 mm (75.7") 1892.5 mm (74.5")
CL
CL
CL
63.2 m
(2.49")
Alternate Bracket
Orientation
Alternate Bracket
Orientation
Jumper
Assembly
Bracket #2
Bracket #4
Bracket #3
Bracket #1
Machine
Interface Cable
Sensor #1
Sensor #2
CL
54.7 mm
(2.15")
33.7 mm
(1.33")
L3
63.2 mm
(2.49")
L2
L5
98.2 mm
(3.87")
L4
45° Potential
Sensor Rotation
Figure 3. Inverted Bracket #1 with Machine Interface
Cable oriented horizontally (0° to ±45°)
NOTE: Machine Interface Cable oriented
vertically not shown, see Figure 2.