Metrohm NIRS XDS MasterLab Analyzer User Manual
Page 40
![background image](/manuals/587149/40/background.png)
38
▪▪▪▪▪▪▪
5.
The vertical post of the adjustment is
marked in 1mm (about 0.040”)
increments. The rotary knob is marked
in 50 increments. One marking on the
knob equals 0.01mm in vertical position.
It takes two full rotations of the knob
per marking on the vertical post.
Therefore, to move the height upward
by one marking on the post, rotate the
knob two full turns CCW. One mark on
the post equals 0.5mm.
Set the height to be approximately
0.5mm (0.020”) above the height of the
thickest tablet. (Tablets will vary
somewhat in height due to tablet press
and material tolerances.) A good rule of
thumb is to make note of any tablets
that appear high, and use one of them
as a measuring point. A shim may be
used to assure consistency.
Be sure the marking on the rotating
scale is lined up correctly with the
vertical line on the post. Record this
setting for use every time this type of
tablet is scanned.
6.
Lock the transmission detector height,
tighten the cap screw on the left side of
the detector, using a 1/16” Allen
wrench, provided in the accessory kit.
- 915 KF Ti-Touch (382 pages)
- 800 Dosino (53 pages)
- 767 Calibrated Reference (23 pages)
- 940 Professional IC Vario ONE/SeS/Prep 2 (54 pages)
- 754 Dialysis Unit (49 pages)
- 815 Robotic Soliprep for LC (76 pages)
- Vision Manual (207 pages)
- tiamo 2.1 Manual (1532 pages)
- 825 Lab Link (37 pages)
- 808 Titrando (70 pages)
- 902 Titrando (52 pages)
- 756 KF Coulometer (163 pages)
- 756 KF Coulometer (162 pages)
- 940 Professional IC Vario ONE/LPG (98 pages)
- 850 Professional IC Anion MCS Prep 3 (154 pages)
- 850 Professional IC Anion MCS Prep 3 (152 pages)
- 904 Titrando (58 pages)
- 850 Professional IC Anion MSM-HC MCS Prep 2 (150 pages)
- 930 Compact IC Flex Oven/ChS/Deg (47 pages)
- 872 Extension Module Liquid handling (64 pages)
- 814 USB Sample Processor (90 pages)
- 814 USB Sample Processor (91 pages)
- 940 Professional IC Vario (43 pages)
- Vision – Tutorial (40 pages)
- 799 GPT Titrino (242 pages)
- 889 IC Sample Center (68 pages)
- 761 Compact IC (228 pages)
- 851 Titrando (100 pages)
- 748 DH Sample Changer (32 pages)
- 940 Professional IC Vario ONE/SeS/HPG (51 pages)
- 896 Professional Detector – Amperometry (62 pages)
- 877 Titrino plus (139 pages)
- 881 Compact IC pro – Anion (129 pages)
- 940 Professional IC Vario ONE/ChS/HPG (112 pages)
- 930 Compact IC Flex Deg (41 pages)
- 840 PC Control 5.0 / Touch Control (351 pages)
- 940 Professional IC Vario ONE/Prep 1 (45 pages)
- 776 Dosimat (42 pages)
- 717 Sample Changer (36 pages)
- 815 Robotic USB Sample Processor XL (114 pages)
- 815 Robotic USB Sample Processor XL (113 pages)
- 940 Professional IC Vario ONE/SeS/PP (126 pages)
- 838 Advanced Sample Processor Installation Instructions (109 pages)
- 700 Dosino (55 pages)
- 719 S Titrino (152 pages)