Metrohm 930 Compact IC Flex ChS/Deg - Manual (Page 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
930 Compact IC Flex ChS/Deg (2.930.1260)
￭￭￭￭￭￭￭￭ 3
1.2 Intended use
The 930 Compact IC Flex ChS/Deg is used for the determination of anions
or polar substances with chemical suppression using ion chromatography.
It can also be used as needed for the determination of cations or anions
without chemical suppression.
The present instrument is suitable for processing chemicals and flammable
samples. Usage of the 930 Compact IC Flex therefore requires the user to
have basic knowledge and experience in handling toxic and caustic sub-
stances. Knowledge with respect to the application of the fire prevention
measures prescribed for laboratories is also mandatory.
1.3 Safety instructions
1.3.1 General notes on safety
WARNING
This instrument may only be operated in accordance with the specifica-
tions in this documentation.
This instrument has left the factory in a flawless state in terms of technical
safety. To maintain this state and ensure non-hazardous operation of the
instrument, the following instructions must be observed carefully.
1.3.2 Electrical safety
The electrical safety when working with the instrument is ensured as part
of the international standard IEC 61010.
WARNING
Only personnel qualified by Metrohm are authorized to carry out service
work on electronic components.
WARNING
Never open the housing of the instrument. The instrument could be
damaged by this. There is also a risk of serious injury if live components
are touched.
There are no parts inside the housing which can be serviced or replaced
by the user.