Metrohm 828 IC Dual Suppressor - Manual (Page 44)

5 Care and maintenance
828 IC Dual Suppressor/ 8.828.1003 Instructions for Use
36
Figure 8: Opening the instrument
23 Front housing screws 24 Rear housing screws
25 Housing cover 26 Suppressor cell
2 Open the instrument
• Loosen the two front housing screws 23 on the base of the
IC Dual Suppressor, see Figure 8.
• Loosen the two housing screws 24 at the top of the rear
panel of the IC Dual Suppressor.
• Lift off housing cover 25 upward.
3 Remove the suppressor cell
• Loosen the pressure screws on all four of the capillaries
connected to suppressor cell 26, see Figure 9.
• The suppressor cell 26 can be pulled forward out of the
electrode clamp holders.
24
23
25
26