Metrohm 828 IC Dual Suppressor - Manual (Page 18)

2 Installation
828 IC Dual Suppressor/ 8.828.1003 Instructions for Use
10
2 Installation
2.1 Instrument setup
2.1.1 Packaging
The 828 IC Dual Suppressor and its specially packed accessories are
supplied in very protective special packaging which contains a shock-
absorbing plastic foam lining. The instrument itself is contained in an
dustproof evacuated polyethylene bag. Please store this packaging in a
safe place; it is the only way in which the safe transport of the
instrument can be guaranteed.
2.1.2 Checks
Please check that the delivery is complete and undamaged
immediately on receipt (compare with delivery note and list of
accessories given in Section 6.2). If transport damage is evident please
refer to the information given in Section 6.4 “Warranty”.
2.1.3 Location
Place the instrument on a suitable vibration-free laboratory bench,
protected as much as possible from corrosive atmospheres and
contact with chemicals.
Choose a location where the temperature is usually between +5 °C and
+45 °C. The instrument should be protected against excessive
variations in temperature and direct sunlight.