Metrohm 930 Compact IC Flex Oven/SeS/PP/Deg - Manual (Page 5)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
Table of contents
930 Compact IC Flex Oven/SeS/PP/Deg (2.930.2560)
￭￭￭￭￭￭￭￭ III
Table of contents
1 Introduction 1
1.1 Instrument description ......................................................... 1
1.2 Intended use ......................................................................... 3
1.3 Safety instructions ................................................................ 4
1.3.1 General notes on safety ........................................................... 4
1.3.2 Electrical safety ........................................................................ 4
1.3.3 Tubing and capillary connections ............................................. 5
1.3.4 Flammable solvents and chemicals ........................................... 5
1.3.5 Recycling and disposal ............................................................. 5
1.4 Symbols and conventions .................................................... 6
2 Overview of the instrument 7
2.1 Front ...................................................................................... 7
2.2 Rear ........................................................................................ 8
2.3 Feed-throughs for capillaries and cables .......................... 10
3 Installation 13
3.1 Setting up the instrument .................................................. 13
3.1.1 Packaging .............................................................................. 13
3.1.2 Checks .................................................................................. 13
3.1.3 Location ................................................................................ 13
3.2 Capillary connections in the IC system ............................. 13
3.3 Removing transport locking screws ................................. 16
3.4 Connecting the drainage tubing and leak sensor ............ 17
3.4.1 Installing the drainage tubing ................................................ 17
3.4.2 Connecting the leak sensor .................................................... 19
3.5 Column oven ....................................................................... 19
3.6 Connecting the eluent bottle ............................................. 20
3.7 Connecting the eluent degasser ........................................ 23
3.8 Installing the high-pressure pump .................................... 23
3.9 Installing an inline filter ..................................................... 24
3.10 Installing the pulsation absorber ...................................... 25
3.11 Injection valve ..................................................................... 26
3.12 Suppressor .......................................................................... 28
3.12.1
Inserting the rotors ................................................................ 28
3.12.2 Connecting the suppressor .................................................... 31