Metrohm 930 Compact IC Flex Oven/SeS/PP/Deg - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
930 Compact IC Flex Oven/SeS/PP/Deg (2.930.2560)
￭￭￭￭￭￭￭￭ 19
Route the loose end into a waste container.
3.4.2 Connecting the leak sensor
Plugging in the leak sensor connection cable
The leak sensor connection cable is coiled up in the base tray.
1 Pull the leak sensor connection cable out of the base tray as far as
needed.
2 Plug the plug for the leak sensor connection cable into the leak sen-
sor connection socket (labeled Leak Sensor).
3.5 Column oven
The column oven ensures that the separation occurs at a constant temper-
ature. It is firmly sealed by the instrument's smaller door and is well insula-
ted. The capillaries are fed through small recesses on the inner front edge,
so that they do not get pinched when the door is closed. The temperature
of the column oven can be configured in the software.
The column oven is completely connected. No installation work is
required.