Metrohm 930 Compact IC Flex Oven/SeS/PP/Deg - Manual (Page 26)

3.3 Removing transport locking screws
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
930 Compact IC Flex Oven/SeS/PP/Deg (2.930.2560)
3.3 Removing transport locking screws
To avoid damage to the drives for the high-pressure pump and the vac-
uum pump during transport, the pumps are secured with transport lock-
ing screws. These are located at the rear of the instrument and labeled
with Transport security screws.
Remove these transport locking screws before the initial start-up.
Accessories For this step you need:
￭ Hex key 4 mm (6.2621.030)
Remove the transport locking screws
Figure 6 Removing the transport locking screws
1 Transport locking screws
For the vacuum pump. Only present if the
instrument has a degasser. 2 Transport locking screws
For the high-pressure pump.
1 Remove all of the transport locking screws with the hex key.
Store the transport locking screws in a safe place. Reinsert the transport
locking screws each time you transport the instrument a significant dis-
tance.