Metrohm 757 VA Computrace - Manual (Page 17)

3.1 Setting up the instrument
757 VA Computrace – Hardware
13
3 Installation
This section offers a full description of the 757 VA Computrace Stand
and provides detailed information on the various electrodes and the
stirrer. Reliable operation of the instrument is assured only if you follow
the instructions in this section exactly.
3.1 Setting up the instrument
3.1.1 Packaging
The 757 VA Computrace Stand is supplied together with the separately packed ac-
cessories in special packages designed to ensure excellent protection. These con-
tain shock-absorbing foam linings foamed to the individual shape and embedded in
blue plastic film. The instrument itself is packed in an evacuated polyethylene bag.
As only these special packaging guarantees indemnified transport of the instru-
ment, it is essential you store it in a safe place.
3.1.2 Check
After receipt, immediately check whether the shipment is complete and has arrived
without damage (compare with delivery note and list of accessories in sections 6.1).
In the case of transport damage, see instructions in section 6.3 "Warranty".
3.1.3 Location
Place the 757 VA Computrace on a laboratory bench in a position suitable for op-
eration and which is free from vibrations, protected against corrosive atmospheres
and contamination by chemicals. The drip pan 7 (6.2711.040) has to be placed at
the front side of the 757 VA Computrace Stand to catch drops (see Fig. 1).