Metrohm 838 Advanced Sample Processor Manual - Manual (Page 88)

3.8 Standard methods
80 Metrohm 838 Advanced Sample Processor, Appendix
3.8 Standard methods
The following pages contain a list of the user methods supplied to-
gether with explanations of important commands. They are used, if the
838 Advanced Sample Processor is not being controlled directly by a
PC software.
These standard methods are therefore mostly used in combinations of
the 838 Advanced Sample Processor with the Metrohm VA instruments,
e. g. the VA Computrace 797. Synchronizing the instruments is
achieved by activating signals via Remote lines.
An overview of the standard methods for voltammetric analysis stored
in the 838 is given below.
Method name Function
LAT Linear Approximation Technique
Standard addition for brightener (electroplating bath analysis)
MLAT Modified Linear Approximation Technique
Standard addition for brightener (electroplating bath analysis)
DT Dilution Titration
Suppressor analysis ("Dilution Titration Technique”, electroplating
bath analysis)
VA Voltammetric Trace Analysis
We recommend that each new method is worked through step by step
with the TRACE function before it is started for the first time and
adapted to suit the particular requirements