Metrohm 838 Advanced Sample Processor Manual - Manual (Page 41)

2.3 Composition of a method
Metrohm 838 Advanced Sample Processor, Operation 33
Command Teachable parameter Mode of function
LIFT Lift position in mm absolute
PERISTALT Pump time in sec additive
PUMP Pump time in sec additive
WAIT Waiting time in sec additive
SCN Rm Status of the 8 remote lines "live" value
SCN RS Character sequence received "live" value
2.3.9 TRACE-Funktion
START
The "TRACE" function is a valuable aid for operating through an entire
sequence or method (or parts thereof) for test purposes. Every com-
mand line in a sequence can be executed directly by pressing the
key. Upon completion of the action the next command line
is displayed.
Tracing can be executed immediately after entry of a sequence line or
at any time after opening the parameter menu and selecting a se-
quence.