Metrohm 850 Professional IC AnCat MCS - Manual (Page 62)

2.17 Peristaltic pump
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
52 ￭￭￭￭￭￭￭￭
850 Professional IC – AnCat – MCS
3 Connecting the pressure side
Note
Depending on the use of the peristaltic pump, on the pressure side
you can either connect:
￭ Case A: a 6.2744.180 pump tubing connection with filter
(see Figure 29, page 52) or
￭ Case B: a 6.2744.160 pump tubing connection without filter
(see Figure 30, page 53).
For pumping the auxiliary solutions to the MSM or to the SPM, a
6.2744.180 pump tubing connection with filter must be used.
Case A: 6.2744.180 pump tubing connection with filter:
1 2
3
Figure 29 Install pump tubing connection with filter
1 Union nut 2 Adapter
3 Tubing olive with filter holder
￭ Slide union nut (29-1) onto the pump tubing.
￭ Select a suitable adapter (29-2) and slide it onto the pump tubing.
The type of adapter depends on the pump tubing (see Table 1,
page 53).
￭ Place the tubing olive with filter holder (29-3) onto the pump tub-
ing.
￭ Screw the union nut (29-1) onto the tubing olive (29-3).
or
Case B: 6.2744.160 pump tubing connection without filter: