Metrohm 845 Eluent Synthesizer User Manual
Page 36
3 «Mix Control» software
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
30
Active
Only users set to "
active
" can log in.
Admin.-rights
Only Administrators have the following rights:
• Depot editing (see section 3.4.1)
• System Settings editing (see section 3.4.3)
• Report Configuration editing (see section 3.4.4)
• User administration
• Drawing up and saving methods (see section
• Signing methods (see section 3.5.1)
• Audit trail opening (see section 3.5.2)
• GLP Manager opening (see section 3.5.4)
• Firmware update (see section 3.5.5)
Inserts a new line in the user table in which a new user
can be defined.
Prints a list with the selected (blue highlighted) users.
Opens the
PASSWORD
window.
The button
Password is only active, if at least one user with Adminis-
trator rights is defined and active.
Define user
After the software has been opened for the first time define an Admini-
strator as the first user:
1. Click on
. A new line will be shown.
2. Enter the
User
and
Full name
.
3. Activate
Active
and
Admin.-rights
.
4. Click on [OK]. The
LOGIN
window opens.
5. Enter the previously defined User. Leave the
Password
field
empty.
6. Now edit the password. Click on
. The
CHANGE
PASSWORD
window opens.
7. Leave the
Old Password
field empty. Enter the required pass-
word under
New Password
and
Confirm Passw...
, and click on
[OK]. A return is now made to the
LOGIN
window.