Metrohm 845 Eluent Synthesizer - Manual (Page 12)

1 Introduction
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
6
1.3 Information on the Instructions for Use
Please read through these Instructions for Use carefully before you put
the 845 Eluent Synthesizer into operation. The Instructions for Use
contain information and warnings to which the user must pay attention
in order to assure safe operation of the instrument.
1.3.1 Organization
These Instructions for Use 8.845.1003 for the 845 Eluent Synthesizer
provide a comprehensive overview of installation, operation, mainte-
nance, fault rectification and technical specifications of this instrument.
The Instructions for Use are organized as follows:
Sect. 1 Introduction
General description of instrument, parts and controls
and safety notes.
Sect. 2 Installation
Installation of the instrument, mains connection, con-
nection to PC, connection of Dosino(s)/stirrer, pH
controller.
Sect. 3 «Mix Control» software
Explanation of how to use the «Mix Control» software.
Sect. 4 Maintenance - Troubleshooting
Care, cleaning the dosing units, troubleshooting.
Sect. 5 Annex
Technical data, standard equipment, options, war-
ranty, conformity declarations, index.
To find the required information on the instruments, use either the Ta-
ble of contents or the Index at the back.