Metrohm 845 Eluent Synthesizer - Manual (Page 30)

3 «Mix Control» software
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
24
No. [ 1...5 ; display only ]
Number of the Component.
The number under which the components are de-
fined here must be the same as that of the connection
( 5 ) which the components are connected to.
Component [ Component name ]
Name of the Component (see section 3.4.2). You can
choose it from a selection list or enter it yourself.
Only Components with a defined Component name
are displayed in the Method part of the Main Window
(see section 3.3). If the Component name is deleted,
the Component is not displayed in the Method part
of the Main Window anymore (that does not apply for
Component 1, which can not be deleted ).
Concentration [ 1...20000 ; 0.0 ] (for unit mmol/L) ; [ 1...800000 ; 0.0 ]
(for unit mg/L)
Numerical value for concentration.
Unit [ mmol/L, mg/L, %, mL ;mmol/L ]
Unit for the given concentration/amount. This Compo-
nent's unit will also be adopted in the Main Window.
Manufacturer [ Name of manufacturer ]
Name of the manufacturer of the Component. You can
choose it from a selection list or enter it yourself.
Date Of Expiry [ Date ; current date ]
Expiry date of the Component. If you click on the field
the Date window opens, in which you can select the re-
quired date. If the current date is later than one of the
defined expiry dates then a message will be shown at
the start of a mixing process.
Date Of First Use [ Date ; current date ]
Date of the first use of the Component. If you click on
the field the Date window opens, in which you can select
the required date.