Dulce Systems PRO Mini - Manual (Page 42)

PRO MINI Installation and User’s Manual
2
nd
Step – Pull the Locking Pin down and pull MPD Pack from the PRO Mini
chassis.
Pull down to
unlock during
insertion and
removal.
Locking Pin
3
rd
Step – Remove the 4 screws located below using a Phillips #1 screwdriver:
Remove these 4 screws first;
two screws on the left, and two
screws on the right.
Note: Keep these four screws
separate from the disk drive
retaining screws.
4
th
Step – Remove the 16 screws indicated below using a Phillips #1 screwdriver.
Keep the disk drive screws separate from the four screws of the previous step.
Remove
the
sixteen
disk drive
retaining
screws
indicated
here.
Page 42