Dulce Systems 19” Rackmount for PRO EX - Manual

19” Rackmount installation for PRO EX
Dulce Systems Page 1 900‐0013‐0 v1
1) Mount the Slider on the PRO EX.
Position the PRO EX as shown with front on left, feet side towards you.
Orient the Slider with the Lock Tab on towards the rear.
Remove the two bottom feet and mount the Slider to their mount points.
Do the same on the other side (no feet on other side).
2) Mount the Rails to the front of the rack.
Mount the Extender Plate to left and right front of cabinet as shown.
Mount the Square Nut to 2
nd opening from bottom.