DJI Z15-5D III (HD) - Manual (Page 8)

8
©2014 DJI. All Rights Reserved.
Camera Setup
Follow the steps below to configure your camera to work with the Z15-5D III (HD). Please read the relevant
section for your camera.
Canon 5D Mark III
Camera Setup / Mount
1. Set the shooting mode to Shutter-priority AE (Tv) or Manual exposure (M) by turning the Mode Dial.
2. Turn the Live View shooting/Movie shooting switch (
/ ) to the Movie shooting position.
3. Press the AF.DRIVE button and select the drive mode as (10-sec. self-timer/Remote control) or
2
(2-sec. self-timer/Remote control).
4. Turn the Image Stabilizer switch, located on the lens, to OFF.
5. It is recommended that you set the shutter speed from 1/100sec to 1/30sec. If the shooting mode is set to
Manual exposure, please adjust the aperture properly and set the ISO speed to A (Auto).
The settings underlined above are strongly recommended. Failure to follow these settings may
result in poor image quality.
The use of an SD card is preferred, as a CF card may affect the performance of the gimbal and
lead to poor image quality.
Mount
Mounting the Lens
1. Mount the lens onto the camera as shown above.
Camera
Lens Retaining Ring
Lens
Movie Shooting Mode Dial