DJI Z15-5D III (HD) User Manual

Page 5

Zenmuse Z15-5D III (HD)

User Manual

Screw Package ×1

For mounting the gimbal to your aircraft (M2.5*8 cap
head screw).

10-Pin to 9-Pin Cable × 2

For connecting the GCU to the gimbal.

7-Pin Cable × 1

For connecting the GCU to the Lightbridge air
system.

8-Pin to 6-Pin Cable × 2

For connecting the GCU to the gimbal.

Servo Cable Package × 1

For connecting the GCU and the receiver.

AV Video Power Cable × 1

For connecting the GCU and the wireless video
transmission module, and transmitting the AV signal.

iOSD Mark II Cable × 1

For connecting the GCU and the DJI iOSD MarkII.

Micro-USB Cable × 1

For adjusting parameters and upgrading the firmware
via a PC.

CAN-Bus Cable × 1

For the CAN-Bus Flight Control System.

Spare Package × 1

Vibration Absorbers, Spare Screws, and Mounting
Bracket.

In the Box