DJI Z15-5D III (HD) - Manual (Page 18)

Zenmuse Z15-5D III (HD) User Manual
18
©2014 DJI. All Rights Reserved.
PC Assistant Tuning
Installation and Usage
1. Ensure the most recent drivers are installed correctly. This should have been done before using the A2 or
WooKong-M software.
2. Download the appropriate Assistant installer from DJI.com.
3. Double click the Assistant installer and follow the steps to finish the installation.
4. Run Assistant.
5. Upgrade the firmware or configure parameters using Assistant as needed.
The Assistant installer can be used on Windows XP, Win7, and Win8 (32 or 64 bit).
Basic Setting
You can set transmitter channels for roll, tilt and pan control, and also switch between working modes
during flight. Move your cursor to each area or refer to this manual for more details.
2-Positon
Switch
3-Positon
Switch
3-Positon
Switch
PC Assistant Tuning
AUX3 Switch Settings
The Z15-5D III (HD) supports starting and stopping your camera’s video record function by using a 2-position
switch through AUX3. Connect the relevant channel of the receiver to the AUX3 port. Toggle the switch to
start/stop recording.
Position-1: Start recording
Position-2: Stop recording