In the box, Gimbal×1, Gimbal control unit (gcu) ×1 – DJI Z15-5D III (HD) User Manual

Page 4: Lens retaining ring ×1, Mounting bracket ×4, Mounting board for receiver ×1, Cable clamp ×1, Camera mount screw ×2, Lens retaining ring screw ×1

In the Box

Gimbal×1

The Z15-5D III (HD) gimbal includes built-in servo
drive modules, an independent IMU module and a
HDMI-HD/AV module.

Gimbal Control Unit (GCU) ×1

Connect the GCU to your flight control system
using the CAN-Bus cable. The GCU will control the
gimbal’s pan, roll and tilt movements. Connect the
GCU to video downlink for video signal.

GCU

ROLL

TILT

PAN

MODE

SHUT

AUX1

AUX2

AUX3

Lens Retaining Ring ×1

For mounting the camera lens.

Mounting Bracket ×4

For mounting the gimbal to the landing gear.

Mounting Board for Receiver ×1

For attaching the GCU and providing a convenient
mount for the receiver or other devices.

Cable Clamp ×1

For cable management.

Camera Mount Screw ×2

A standard tripod mounting screw.

Lens Retaining Ring Screw ×1

For attaching the lens retaining ring to the gimbal.

In the Box