Specifications – DJI Z15-5D III (HD) User Manual
Page 26
Zenmuse Z15-5D III (HD)
User Manual
26
©2014 DJI. All Rights Reserved.
Specifications
General
Built-In Functions
Three Working Modes
Orientation-locked control
Non orientation-locked control
FPV mode (Reset)
Built-in independent IMU
module
DJI gimbal special servos
drive module
HDMI-HD/AV module
Wireless video transmission
supported
Camera shutter control supported
Wide range voltage input supported
S-Bus/PPM Receiver supported
360° panoramic photograph function
Auto-calibration function
Peripheral
Supported Camera
CANON EOS 5D MARK III
Supported Lens
CANON EF 24mm f/2.8 IS USM
GCU Input Power
4S~12S LiPo (Recommend 6S if with S1000)
Control Requirement
At least four spare receiver channels
Assistant Software System
Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mechanical & Electrical Characteristics
Working Current
Static current: 200mA (@25V)
Dynamic current: 400mA (@25V)
Locked-rotor current: 4A (@25V)
Operating Temperature
-10°C ~ 50°C
Weight
1.53Kg
Dimensions
281mm × 242mm × 222mm
GCU Weight
63g
GCU Dimensions
64.2 mm × 34.1mm × 19.5mm
Working Performance
Load Weight (Reference Value)
2664g(5D MARK III with SD Card & Battery & CANON EF 24mm f/2.8 IS
USM Lens)
Controlled Angle Accuracy
±0.02°
Maximum Controlled
Rotation Speed*
Pan axis: ±90°/s
Tilt axis: ±130°/s
Roll axis: ±30°/s
Controlled Rotation Range
Pan axis control: ±360° continuous rotation
Tilt axis control: +15°/-120°
Roll axis control: ±25°
Note*: Gimbal’s Maximum Controlled Rotation Speed corresponds to TX stick input pushed to 100% end-points.
Appendix