Appendix c – Calculated Industries 4095-B User Guide User Manual

Page 55

SER

’

UIDE

— 55

APPENDIX C –

Preference Settings

The Pipe Trades Pro has Preference Settings that allow you to
customize or set desired dimensional formats and calculations.
If you replace your batteries or perform a Full Reset* (press

 ,

hold down

 , and press 

), your calculator will return to the

following settings (in addition to those listed on the previous page):

*Depressing the Reset button located above the

 will also

perform a Full Reset. Asterisks below indicate default values.

Preference Options

1) Fractional Resolution

– *1/16 (displays fractional values
to the nearest 16th of an Inch)

–

1/32

–

1/64

–

1/2

–

1/4

–

1/8

2) Area Display Format

– *Standard (if units entered are
the same—e.g., Feet x Feet—the
answer will remain in this format
(Square Feet), but if units entered
are different — e.g., Inches
x Feet—area answer will be
displayed in Square Feet)

–

Square Feet (area answers

always displayed in Square Feet,
regardless of unit entry — e.g.,
Inches x Inches = Square Feet)

–

Square Inches (area answers

always displayed in Square Inches
— e.g., Feet x Feet = Square Inches)

–

Square Meters (area answers

always displayed in Square Meters
— e.g., Feet x Feet = Square Meters)

(cont'd)