Bully Dog 40450 GTT+ - Manual (Page 13)

40450
GT T
+
12
Gauge Setup (continued)
Panic Function
The "ON" setting will enable the Theft Deterrent System by pressing
and holding the Panic Button. Use the Lock Button if the Panic Button
is unavailable.
Wireless Auto Lock
This automatically locks doors after they are unlocked with the
wireless key.
Wireless Auto Lock Time
This will change the amount of time from unlocking the door(s) with
the wireless key to re-locking them automatically.
Optical Flash on Lock
This is used to turn ON or OFF the hazard answer back of the wireless
door lock.
Unlock Driver Door
Use the GT to disable this feature so all of your vehicle doors will
unlock with one press of the button on a remote door lock unit.
Power Back Door
Wireless PBD Operation
This function changes the operation of the PBD by transmitter.
PBD Buzzer
This function will adjust the volume of the buzzer while the PBD
operates.
Security
Entry Delay
This will change the Entry Delay Time, or the period before starting
the warning, by the Passive Mode.
Passive Mode
This will set the Theft Deterrent System in 30 seconds after the Driver
door is closed and the Key is removed from the Ignition Key Cylinder.
Warning Broken Glass
This will turn the Glass Break Sensor ON or OFF.
Warn by Horn
This turns the glass break sensor ON or OFF. It is only functional when
the vehicle has a glass break sensor.
Warnings
Key Reminder Sound
This function changes the times at which the key reminder buzzer will
continue to sound.
Key Reminder Volume
This changes the volume of the key reminder buzzer.
Seat Belt Chime
This changes the seat belt reminder chime.
Other
Traction Control
This function will disable Traction Control.
Zero Point Calibration
This function is used to calibrate the Yaw Rate Sensor.
ECT Reset
This function is used to delete what the Electronic Controlled
Transmission has learned.