Bully Dog 40450 GTT+ - Manual (Page 10)

40450
GT T
+
9
AvAIlAble oPtIons – All MoDels
These options are presented in the order they appear on the Main Menu. If options are missing in your Main Menu, you
should update your GT T+.
Change Vehicle__________________________________________
This option allows you to choose the type of vehicle that the GT T+ will be used with. If the tune has already been installed, the Change
Vehicle option cannot be used.
Install Download
This option allows you to install the tune to the engine computer in your vehicle. If the tune is already installed, this option will allow you to
return to stock (basically uninstall the tune) or change certain settings that can only be changed by writing a new tune to the ECM.
Gauge Setup
This option will allow you to change which gauges are being displayed on the main gauge screen. Definitions for each type of gauge option
available are listed on the next page.
Changing the Information on the General Display
1. Choose Gauge Setup from the Main Menu.
2. Press the button on the left side of the GT T+ to highlight the gauge slot you would like to change.
3. Use the buttons on the right side of the GT T+ to scroll through the different functions and highlight the one you want shown on the
General Display.
4. When you are done, use the top left button to go back to the Main Menu and General Display.
NOTE: All of the gauge types may not be available through your vehicle’s diagnostic port (OBDII port). This fact is out of the control of Bully Dog; however, Bully
Dog offers a range of add-on automotive sensors and sensor interface equipment. Contact Bully Dog or a Bully Dog dealer to learn more.
®
Go Back
Speed
Boost
RPM
Coolant
GAUGE SETUP
Gauge 1
Use the Up & Down Arrows to
Change the Tranny Tune
Pyro 2
Speed
Boost
Set Gauge 1
Set Gauge 2
Set Gauge 3
Set Gauge 4