Bird Technologies 8578A100GIG - Manual (Page 4)

+
Note: Calls attention to supplemental informa-
tion.
Warning Statements
The following safety warnings appear in the text where there is danger to op-
erating and maintenance personnel and are repeated here for emphasis.
WARNING
Do not insert a screwdriver or any thin metal objects through the
perforated cooling air grilles while the load is in operation. The power
within the unit could arc over and will cause serious injury to
personnel and damage to the unit.
WARNING
Disconnect this unit from RF power sources before any disassembly for
repair or replacement procedures. The potential for electrical shock
exists.
WARNING
Surface can reach temperatures in excess of 100°C when maximum
power is applied to load.
WARNING
Limit the interlock terminal to less than 30 Vrms. Although the
interlock terminal is rated to 230 Vac, the potential for electrical shock
exists.
Caution Statements
The following equipment cautions appear in the text whenever the equipment
is in danger of damage and are repeated here for emphasis.
CAUTION
Connect interlock before RF operation.
CAUTION
Do not apply more than the rated RF power to load. Excessive RF
power will damage the load resistors.
CAUTION
Do not block airflow. Air enters the housing through perforated grilles
at the side of the unit and exhausts through the opposite grille of the
unit. Blocking these grilles could cause unit failure.
ii