Bird Technologies ACM Series-Manual - Manual (Page 14)

Bird Technologies
2
Optional Accessories
Refer to "Replacement Parts" on page 26 for part numbers of accessories.
Digital Display -
Displays the ACM status and provides a low voltage
(+15 Vdc) power supply. Includes a power cord and 50 foot, 9 pin and
15 pin cables.
PCTool Software -
PC software for data display, alarm monitoring,
and setting alarm options
Rack Mount -
Allows two units to be mounted in a standard (2U)
panel mount. Available with and without a low voltage (+15 Vdc)
power supply.
DB-15 Power/Alarm Cables -
Connects the Antenna Monitor to a
power supply and to external controllers. 50 feet long with male/
female connectors. Refer to Figure 3 on page 9and Figure 5 on page 10
for pin layout.
DB-15 Interface Connector -
Allows easy custom data cable connec-
tions to the ACM.
9 pin RS-232 PC Interface Cables -
Connects the Antenna Monitor to
a PC. Available in either 10 or 50 foot lengths, with male/female con-
nectors. Refer to Figure 7 on page 11 for pin layout.
Panel Mount -
The Panel Mount Kit allows up to two ACMs to be
installed in a standard (2U) panel mount. They are secured with locator
holes and a velcro strap. Power is provided through 15-pin parallel
cables, connected to a terminal strip at the factory. The ACM-RACKU
includes a +15V power supply, while the ACM-RACK requires a 48V
customer-provided power supply. Figure 2 lists dimensions and high-
lights important components.
Note: Exception: Model ACM-L2-DFDFTL-12SP requires
a 12V customer-provided power supply in place of the 48V
power supply.