Bang & Olufsen Serenata - User Guide - Manual (Page 54)

>> Settings 54
Security
Use this menu to protect the phone against
unauthorised use.
Note! If you enter an incorrect PIN /PIN2 three times, the
SIM card is blocked. To unblock it, you need to enter your
PUK/PUK2 (Personal Unblocking Key). The codes are
supplied by your network operator.
PIN check
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
Change PIN
Use this menu to change your pincode. The
pincode check feature must be enabled to use this
feature.
Phone lock
This feature locks the phone from unauthorised
use.
When this feature is enabled, you must enter a 4-
to 8-digit phone password each time the phone is
switched on.
Note! The password is preset to 00000000. To
change the password, use the Change password
menu.
Change password
Use this menu to change your phone password.
Privacy
Use this menu to lock all menu options on the
phone, except call functions.
When this feature is enabled, you must enter the
phone password to access menu functions.
SIM lock
The SIM lock feature allows your phone to work
only with the current SIM by assigning a SIM lock
code. You must enter the SIM lock code to use a
different SIM card.
Connection settings
Use this menu to create and customise the profiles
containing the settings for connecting your phone
to the network. You need these settings to use the
web browser or send MMS messages or emails.
Note! Your phone is set up by default for connecting to
the network. If you change the settings without first
checking with your service provider, the web browser,
MMS, and email features may not work properly.
To create a profile
> Select Create. If a profile has previously been
saved, tap More and select Create.
> Set profile parameters:
- Name: enter a name for the profile.
- Access point: edit the access point name used
for the address of the GPRS network gateway.
- Authentication: choose the type of
authentication used.
- User ID: enter the user ID.
- Password: enter the user password.
- Protocol: select the protocol among HTTP,
WAP, and Other.
- Home URL: enter the URL address of the page
to be used as your homepage.
- Gateway address: (WAP only) enter the
gateway address of the proxy server.
- Proxy address and Port: (HTTP only) set the
proxy server address and port.
- Secure connection: (WAP only) turn the
secure mode on or off.
- Idle time (sec.): set a time period after which
the network is disconnected if there has been
no new data traffic in that time.
- Static IP: specify if you want to manually enter
an IP address; see the Local phone IP option. If
you want the IP address to be automatically
assigned by the server, select Off.
- Local phone IP: enter the IP address obtained
from the service provider, if you selected Static
IP.
- Static DNS: specify if you want to manually
enter the DNS (Domain Name Server) address;
see the Server 1 option. If you want the
address to be automatically assigned by the
server, select Off.
- Server 1: enter the DNS address, if you
selected Static DNS.
- Traffic class: select the traffic class.
> Tap More and select Save to save the profile.
To use profile options
Tap More to access the following options:
- Edit: edit the profile.
- Create: add a new profile.
- Delete: delete the selected profile.
- Delete all: delete all profiles.