Bang & Olufsen Serenata - User Guide - Manual (Page 11)

11 Assemble and prepare your mobile phone
To insert SIM-card and battery
1 Pull out the stand and slide the backside
upwards to raise the loudspeaker.
2 Lift the battery cover away.
3 Insert the SIM-card.
Note! Make sure that the gold-coloured
contacts on the card face downwards.
4 Install the battery.
5 Slide the cover back on and press it slightly.
6 Open the cover to the multi-function jack on the
bottom of the phone. Plug the travel charger
into the phone and a standard AC power outlet.
When the phone is completely charged (the
icon is no longer moving), unplug the charger
from the power outlet and from the phone.
About the low battery indicator
When your battery is low, the phone will emit a
warning tone and a low battery message. The
battery icon will also be empty and blinking. If the
battery level becomes too low, the phone will
automatically power off. Recharge your battery to
continue using your phone.
SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your pincode and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
1 2 3
4 5 6
Get started by assembling and setting up
your mobile phone for its first use.
Ready for use
It takes approximately three hours to
charge the phone. When the phone is
charged, unplug the charger, and the
phone is ready for use. To switch on the
phone, press and hold END (red button)
on the wheel.