Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 62)

>> System use with several handsets
Transfer external calls
You can transfer an external call to another handset or to all
hand sets. You can talk with the person answering the internal
handset before transferring the call. When you transfer an
external call to all handsets, the call goes to the handset which
answers first.
Transfer an external call …
Press to make an internal call
Press the number of the handset and the call is
made automatically. Alternatively …
… turn the wheel to search through the internal
listing of handsets and press to make the call. If
the internal call cannot be made, you will hear a
busy signal
If the internal call is answered* 1 …
The display prompts you to transfer the call
Press to enter your choice
Retrieve the external call if the internal call is not answered …
Press OK or to retrieve the external call on
hold
INT
1 – 8
3 Living Room
Transfer
OK
Retrieve?
OK
62
If you have an active call and
another handset elsewhere in the
system breaks in on the line, your
handset emits a single, short beep
to notify you that a third party has
joined the call. This, however, only
happens if the system handsets are
using the same line at the time. If
the first handset is hung up, the
call is transfered to the handset
breaking in.
If a call is on hold at another
handset, any handsets can take
over the call by pressing
then OK.
* 1 When the internal call has been
answered, the called handset can
also terminate the internal call by
pressing OK or .