Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 18)

>> Get started
Set the time and date
After you have registered the first handset, assigned a colour
theme to it and named it, the display prompts you to set the time
and date. The time is shown when the handset is not in use and
when there is no new information in the display. Time and date
are also shown with Caller ID and Redial information.
Set time and date? is shown
Press OK to be able to set the time and date, or
press if you wish to skip this step
Turn the wheel to select a time format and press
OK
Set the hour and minute by turning the wheel
and pressing OK
Set the day, month and year by turning the
wheel and pressing OK. You can now select the
number of phone lines you wish to use When the handset is in idle mode
and there are no new calls, the
clock is shown in the display. The
clock can be displayed in two ways,
either with digits or with circles.
The small circle shows the hours
and the large circle shows the
minutes. In the illustration above
the time is 17:45, 5:45AM or
5:45PM. For further information,
refer to page 55.
Set time and date?
OK
OK
OK
OK
18