Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 30)

Use the Calls list
The Redial and Caller ID function in the Calls list stores the last 24
phone numbers received and called. In addition to the number,
you can also view the call type, time, date, and duration of the call.
If you have entered a name in the Phone book, this is displayed
instead of the number, even if your service provider has provided
Caller ID name information for an incoming call. Identical numbers
are only stored once in the list – the most recent call.
To call from the Calls list …
Press to access the Calls list
Turn the wheel to select a name or number.
Press to open the call entry
If you have two phone lines, the current line for
outgoing calls is indicated in the display. If you
wish to use another line, press the appropriate
line key
Press to make the call. If there is more than one
number type stored with a name, the display
prompts you to select a number type instead*
1
Turn the wheel to select a number type and
press OK to make the call
>> Daily use
You can call the number or name
shown in the display directly by
pressing from all levels of the
Calls list.
If you have selected a primary line,
as described on page 40, the Calls
list shows only those calls received
and called on the primary line.
Press the appropriate line key
when the Calls list is open to view
calls received and called on the
other line. If you have not selected
a primary line, the Calls list
contains calls received and called
on both lines.
The Redial function is only shared
by handsets set up to be common.
Refer to ‘Make a handset ‘personal’
or ‘common’’ on page 61 for more
information.
* 1 Number types are only available
if you use the handset with a
BeoLine 2 or a BeoLine base.
David Jones
OK
L 1 or L 2
OK
David Jones
home
OK
30