Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 14)

First-time registration of the handset to a base
For the base and the handset to be able to communicate, the
handset must be registered to a base. Up to eight handsets can be
registered to the same base.*
1 You cannot register a handset to
more than one base.
If you want to register more handsets to a base, and one or more
of these handsets are BeoCom 6000 or BeoCom 2, the oldest
handset model should be registered first. The functional
operations will then be limited to match the operations of the
oldest handset registered.
> Disconnect the base from the mains for at least two seconds and then
reconnect it. The indicator light flashes, and the base is open for
registration for five minutes.
When your base is open for registration, follow the procedure on the
following page.
The BeoLine 2 base.
You cannot use a BeoLine 2 US
model in markets for Standard
models, and you cannot use a
BeoLine 2 Standard model in
markets for US models.
* 1 If you use a BeoLine PSTN base,
you can only register six handsets.
>> Get started
14
Indicator light