Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 57)

Language … Select the language of the display texts.
Area Codes … Select options to match the requirements of your service
provider. Area Codes contains two sub-menus: Dial and Area code.* 2
– Dial indicates whether or not area codes must be dialled for local calls.
Options are Yes and No.
– Area code 1 allows you to enter up to ten area codes. When you have
entered the first area code, Area code 2 will appear and so on.
Base … This menu contains three sub-menus:
– Remove handset cancels registration of a handset to the base.
– Open base allows you to open the base for registration of additional
handsets.* 3
– Change pincode allows you to enter a new pincode for your base and
change the pincode. Use the number keys to enter the pincode and the
OK key to store it. The default pincode is 0000. If the pincode is
entered incorrectly three time, the handset returns to idle mode.
Phone lines … The phone has two lines, but can be set for use with one
line only. Options are 1 and 2.*
4
Flash time … Choose Long, Short or Customized.* 3 The correct flash
time depends on how you have connected your phone. The milli-seconds
of a highlighted setting are shown after a few seconds. For more
information about the Flash time services available and how to use them,
contact your local service provider.
57
Regarding area codes:
Phone companies have different
requirements regarding how to
make local calls. The settings you
choose in the Area Codes menu
are determined by the
requirements of your particular
service provider. If your service
provider requires you to dial:
– 1+area code+number for all
calls… set Dial to Yes and do not
enter an area code for the option
Area code;
– area code+number for local
calls… set Dial to Yes. For Area
code, you can enter up to ten
area codes that fall within your
local calling area;
– neither 1 nor area code for
local calls… set Dial to No and
enter your own area code for
Area code.
* 2 This option and area codes in
general are not available in all
countries.
* 3 ’Open base’ in the ‘Base’ menu
and ‘Customized’ in the ‘Flash time’
menu are only available if you use
the handset with a BeoLine 2 or a
BeoLine base.
* 4 The menu ‘Phone lines’ is only
available if you use the handset
with a BeoLine 2 base.