Bang & Olufsen BeoCom 5 - User Guide User Manual

Page 15

To register the handset to a base …

Press to switch on the handset. The Language
menu appears. Turn the wheel to select the
desired menu language and press OK

Register handset to base? is shown in the display

Press OK. The handset searches for an open base

When a base is located, the PARK number*

for

the base is shown. Check the number against
the number on the base

If the numbers do not match, turn the wheel to
move through the available bases, if more than
one is available. If your base is not shown, open

the base for registration once more and repeat
the procedure

If the numbers match, press to register the
handset to the base

If the base prompts you for a pincode, enter the
pincode and press OK. The display tells you
when registration is complete. You can now give

the handset a colour, as described on page 16

For more information about how

to handle, place and connect a

BeoLine 2 base, refer to the Guide
enclosed with the base.

To open the BeoLine 2 or the

BeoLine base for registration of
additional handsets at a later time,
refer to page 57.

Depending on which base you

have, the PARK number can be
found on a label behind the socket
cover, on the socket cover, or on

the bottom of the base.

to base?

Base found

36.000077123456

Base found

36.000077234567

0 – 9