Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 42)

Enter a new name and number in the Phonebook
At any time, you can store a new name and number in the
Phonebook, or add a new number to an existing name. A number
can contain up to 48 digits, and a name up to 25 characters.*
1 You
can store up to 400 entries.* 2
To enter a new name and number …
Enter the phone number and press OK to be
able to store the number. Store number is
highlighted in the display
Press to be able to store the number. New name
is highlighted in the display. If you wish to add a
number to a name stored in the Phonebook,
refer to the next page*
1
Press to be able to store a new name. The
spelling line appears in the display
Turn the wheel to select the letters for the name
and press to store the selected letter. Both upper
and lower case letters are available*
3
To include digits, press the number keys
Turn the wheel to move the cursor to the
symbol. store appears in the display
Press to store the name. The display prompts you
to select a number type*
1
Turn the wheel to select either home, mobile or
work and press OK to store it
>> Advanced operations
0 – 9
OK
98765432
Store number
OK
98765432
New name
OK
ABCDEFGHIJ
OK
D |
abcdefghijkl
0 – 9
David Jones |
store
OK
David Jones
home
OK
42
Names and numbers are shared by
all handsets set up to be common.
Refer to ‘Make a handset ‘personal’
or ‘common’’ on page 61 for more
information.
* 1 If you use a base other than a
BeoLine 2 or a BeoLine base…
– Names can only contain up to 16
characters
– Number types are unavailable
– You cannot add a number to a
name stored in the Phonebook
* 2 If you use a base other than a
BeoLine 2 base…
– The Phonebook only has 200
entries
* 3 Pressing OK when in the spelling
line is highlighted, switches between
upper and lower case letters, if you
use a BeoLine 2 or a BeoLine base.