Bang & Olufsen BeoCom 5 - User Guide - Manual (Page 27)

Store a number after a call
After a call, you will be asked whether you want to store the
number in the Phonebook, if it is not already there. You can store
the number type – home, work, or mobile phone*
1 – and enter a
name with the number* 2 . You can also add numbers to names
already stored in the Phonebook.* 1
After a call …
The display shows the number and prompts you
to store it in the Phonebook. If a name was
received with Caller ID information, this name is
shown
Press OK to be able to store the number. New
name is highlighted in the display.*
2 Press OK
again if the number belongs to a name not yet
stored in the Phonebook. If you wish to add a
number to a name stored in the Phonebook,
refer to the next page*
1
The spelling line appears in the display
Turn the wheel to select the letters for the name
and press OK to store the selected letter. Both
upper and lower case letters, symbols and
numbers are available*
3
Turn the wheel to move the cursor to the
symbol. store appears in the display
Press to store the name. The display prompts you
to select a number type*
1
Turn the wheel to select either home, mobile or
work and press OK to store it
98765432
Store number?
OK
98765432
New name
OK
_
ABCDEFGHIJ
OK
store
ABCDEFGHIJ
OK
home
mobile
work
OK
27
* 1 You can only enter the number
type and add a number to a name
if you use the handset with a
BeoLine 2 or a BeoLine base.
* 2 ’New name’ is only available if you
use the handset with a BeoLine 2
or a BeoLine base. If you use a
BeoLine PSTN base, proceed to the
next step.
* 3 Pressing OK when in the spelling
line is highlighted, switches between
upper and lower case letters, if you
use a BeoLine 2 or a BeoLine base.