Getting started, Prepare and connect the prompting hardware, Attach to tripod – Autocue SSP-iPad User Manual

Page 4: Ab c e d

SSP-iPadUserManual.docx 2011-06-14

Getting started

This section is designed to get your Starter Series Prompter setup as quickly as possible so that you can start

writing and prompting your scripts.

Prepare and connect the prompting hardware

It is strongly recommended that you view the demonstration video showing the preparation of an Autocue

starter series prompter. Click “Play Demonstration Video” on the main menu of the installation CD.
You can also view the video on the Autocue web site: http://www.Autocue.com/autocueppvid

1. Remove the unit from the shipping box.

Check that the following items have been received:

a. Starter Series Prompter (SSP)
b. 2 x camera securing screws

N E E D E Q U I V A L E N T P H O T O O F i P a d / T a b l e t P C A N D A D A P T O R

c. 4 x long camera plate support pillars (with

countersunk screws attached)

d. 4 x short camera plate support pillars
e. Wide monitor mounting plate

Attach to tripod

2. Remove the camera mounting plate from your tripod. (Refer to the manufacturer‟s

manual if you have difficulty doing this.)

3. Carefully turn your SSP unit over and place on a smooth padded surface to protect

the mirror and monitor screen.

b

c e
d

c d